|
Arc Machines, Inc. has extensive experience in the training of welding personnel worldwide. Training classes are conducted at the customers' location or at our training facility at AMI headquarters located in Pacoima, California.
Our customers have enjoyed considerable success and profit in the use of our automatic orbital welding equipment. The training is designed to give the welding operator the knowledge, experience and skills that must be used in today's high-technology industries such as: Semiconductor, Pharmaceutical, Biotech, Aerospace, Nuclear, Power Generation, Food and Dairy, Brewery, Industrial, General Contractors and other critical industries.
It has been our experience that when welding problems arise, they can often be traced to operation of the equipment by untrained personnel. In order to prevent this occurrence, we strongly recommend to our customers that they receive factory-provided training.
|
|
|
|
 |
| Class in session at AMI Training Center |
 |
David Moon
|
|
AMI supports welding training program at Santa Clarita Valley College
Read the article published in the Welding Journal, February 2001. |
AMI training staff receives a letter of appreciation from UNITED ASSOCIATION of Journeymen and Apprentices of the Plumbing and Pipe Fitting Industry
|
|
U.S.A. Headquarters Training
Two-Day Fusion Welding Training:
AMI offers a free 2-day in-house training class on fusion welding:
- The class is held on the first Tuesday and Wednesday of each month
- Class size is limited
- Advance registration is recommended
Class Outline - Day #1:
The first day is spent in the classroom going through the training manual, getting acquainted with the equipment and options and ending with developing preliminary weld schedules.
- Equipment familiarization / installation / operation
- Safety, warnings, do's and don'ts
- Set-up and functional description
- Model 9 weld heads - configuration / operation / calibration
- Preparation of the weld joint for automatic welding
- Weld schedule development
Class Outline - Day #2:
The second day is dedicated to equipment operation, equipment programming, weld schedule modification and general hands-on welding.
- Welding with the Model 207A (or 107-4A) and Model 9 weld head.
- Weld schedule modification
- Synchro / step welding (heavy-wall pipe)
- Additional information and equipment.
|
|
For further information, please contact the Training Dept. by phone, fax or e-mail at training@arcmachines.com
*For customers outside of the USA, training classes can be arranged by contacting the AMI office nearest you.
AMI also offers Pipe Welding training. Information about pipe welding training will soon be posted, until then please call Jani Baker, Pipe Products Sales Administrator at (818) 896-9556 or email your request to sales@arcmachines.com |
|
|
