 |
 |
|
Models 9CT-1500, 9CT-750, and 9-500 with tube-tube cassette module.
|
Models 9CT-1500, 9CT-750, and 9-500 with cassette modules. |
|
Each Model 9CT weld head utilizes a removable cassette module which acts as a fixturing device. This allows the operator to pre-position the tubes or fittings to be welded, check for proper fit-up, and then insert the weld head into the cassette and perform the weld. Use of multiple cassettes can increase welding rate and productivity.
The cassette modules may be used in-place or mounted on a bench for high-production welding. Multiple cassettes may be used with one weld head, minimizing set-up time and allowing the operator to fit-up multiple joints prior to welding. To verify fit-up, all cassettes feature a window to provide a 360 degree view of the weld joint. Cassettes are available for the Model 9-500, 9AF-750 and 9-1500.
- Minimizes set-up time
- Increases production rates
- Provides 360 degree visual inspection of fit-up
- Available as new weld heads, or adaptable to existing in-field equipment
- Compatible with all Arc Machines’ power supplies
- Conversion kits available for converting standard heads to CT type or CT type to standard
|
|
Conversion Kits for All Model 9 Weld Heads
|
Most Model 9 series weld heads may be converted to an alternate configuration (Model 9, 9AF, 9E, or 9CT) by installing a conversion kit. For example: A basic Model 9-1500 may be converted to a 9E-1500, 9AF-1500, 9CT-1500 or vice-versa. The conversion takes 5-10 minutes, using only a screwdriver and a hex wrench.
|
|
Model 9AF |
Model 9E |
Model 9CT
|
| MODEL 9-500 |
|
|
• |
| MODEL 9AF-750 |
|
•
|
•
|
| MODEL 9-1500 |
•
|
•
|
•
|
| MODEL 9-2500 |
•
|
•
|
|
| MODEL 9-3500 |
•
|
•
|
|
| MODEL 9-4500 |
•
|
•
|
|
| MODEL 9-7500 |
•
|
•
|
|
Specifications subject to change without notice.
MKT 9CT WH / June, 2000/E
|
|
