The Arc Machines’ Model 94 is a rugged weld head for high-production spiral I.D. cladding applications using the GTAW process. It is intended for small-diameter safe-end and vessel nozzle I.D. cladding and I.D. welding. The Model 94 lays down a continuous spiral of uniform cladding in small diameter safe-end applications, vessel nozzles, and stud hole restorations.
Torches available for: minimum 0.68" (17mm) post-weld I.D. to maximum 6.75” (171mm) pre-weld I.D.
Stainless steel rack-and-gear drive for consistent travel speeds in all positions (no friction drives)
Manual travel clutch to allow rapid insertion and extraction of torch
