Home

Return to Applications

ORBITAL WELDING OF STAINLESS STEEL PIPE FOR WATER SYSTEMS
	This typical AWT skid shows orbitally welded stainless steel tubing mounteed on a stainless steel frame.

AFTER being the industrial wing of a regional water treatment company for more than 15 years, American Water Technology Inc. (AWT), Redding, Calif., spun off as an independent company and settled into a market niche targeting small, mostly rural water districts with production of less than half a million gallons per day. These customers had been overlooked by big companies that provide larger water treatment packages and had been affected recently by tightened treatment specifications mandated by regulatory agencies.

Typically, many water specifiers look strictly at material cost for a new installation. However, AWT believed that it might be more interested in units that would require less maintenance and would have a long service life. As a result, the company decided to integrate stainless steel into its systems and use orbital welding equipment wherever possible.

"Stainless steel is the best material considering life cycle cost, sanitation, and physical properties, such as strength, for the water system operator. Other, cheaper materials simply cannot match stainless in the long run," said Chris Beebe, AWT's president.

Productivity and quality improved over manual welding

DECIDING TO GO STAINLESS
The decision to use stainless steel tubing for its systems was based on AWT's examination of different methods and materials in an effort to reduce manufacturing costs and shorten production schedules while improving overall quality. At the time of the spinoff, AWT was primarily using PVC and CPVC on reverse osmosis (RO) systems and galvanized pipe on water softeners and filters. Both PVC and pipe require pipefitting techniques for manufacture, and glued assemblies require custom fit-up.

"We wanted to move toward a product line that had standard, repeatable, and interchangeable components. To that end, we looked at stainless steel tube," said Beebe.

Stainless steel also had the added benefit of sanitary compliance. The strength of stainless steel allows the use of higher water velocities that can help to minimize the growth of biofilm. Biofilm can be reduced by the higher velocities used for flushing systems, but higher flow rates also increase the risk of triggering a water hammer. Such force can fracture plastic piping but is more readily tolerated by stainless steel.

ORBITALLY WELDED STAINLESS STEEL TUBING
AWT's first experience with a welded stainless steel assembly was the face piping for a water softener. That project had comparable material cost to the other options; however, using manual welding took longer than the previous fabrication methods. In an effort to improve productivity, AWl decided to investigate using orbital welding equipment. Dave Buttress at Digital Welding in Sunnyvale, Calif., a representative of Arc Machines Inc. (AMI), Pacoima, Calif., demonstrated the orbital fusion welding equipment at WW's facility.

AWT uses an Arc Machines model 207A orbital welding power supply with a water-cooling unit and a model 84000 weld head for its stainless steel welds. Steve Bates holds a large tube that encloses the weldment for purging.

"We could see the benefits of this technology right away" said Steve Bates, production manager for AWT.

Bates visited Arc Machines headquarters for training on the equipment. AWT rented an Arc Machines model 207 orbital welding system in late 2004. By March 2006, ATW was able to justify the purchase of its own system, which comprised a model 207A power supply with a model 84000 weld head.

These ID fillet welds are actually made by orbital welding from the OD. No filler is added to the weld.

Bates determined that Arc Machines' expertise saved the company both time and money. AWT's innovative approach to orbital welding was evident in the welding of the conductivity probes that require a female pipe thread (FPT) fitting-to-tubing joint. Based on Arc Machines' training, AWT developed its own weld schedules for this joint using FPT-to-tube weld results in what appears step rotation, in which the electrode halts to be a fillet weld inside the tube even during the primary, or high-current, pulse though no filler wire is added. AWT said to maximize penetration and moves on that it could not have made this joint the background, or low-current, pulse. using manual welding techniques. Making an orbital weld on the OD of For another application, AWT needed a stainless globe valve with sanitary fittings. It purchased an offtheshelf valve, machined the valve body, and orbitally welded sanitary ferrules onto the body.

Almost all of AWT's welds are done orbitally now. The repeatability of the process allows AWT to make interchangeable components so it can now make parts ahead of time. The portable model 207 power supply also allows the company to do onsite modifications or repairs. To date all of AWT's products have orbitally welded stainless tube assemblies, and 90 percent of its systems are built using stainless steel tube.

An Arc Machines model 8-4000 weld head is set to make the final weld on an RO permeate line.

Using SolidWorks® CAD software, AWT prebuilds its assemblies. Drawings are made from the CAD models and components are fabricated from them. Tube is cut with a precision band saw, then end-prepped with a GF tube trimmer to make a square butt joint. Close tolerances are held to ensure interchangeability.

By converting to orbitally welded stainless steel, AWT now is able to produce uniform, interchangeable components. Upgrading both materials and fabrication technology has reduced the company's cost to a level comparable with PVC construction while producing a superior product.

American Water Technology Inc., 6975 Danyeur, Redding, CA 96001, 530-246-4426

Arc Machines Inc., 10500 Orbital Way, Pacoima, CA 91331, 818-896-9556, www.arcmachines.com